Carbon Steel Portable Vacuum Sandblast Machine 11kw Roots Blower
Dust Free
Introduction
Our range of abrasive blasting equipment is portable and has a dust
free design. It has high value of vacuum power and very good
separation for debris and abrasives. Vacuum blasting machines find
application in the preparation of surface prior to coating. Also,
just one person is required to operate the equipment. The
construction of blasters is on the pressure vessels in conjunction
with the pressure regulators and air filters. This helps in
acquiring adequate speed of the blasting operation which is carried
out in a dust free environment. The abrasives are instantly and
automatically recovered for reuse. Also, in these vacuum blasting
machines there is no abrasive or flying dust contaminating the
surrounding.
The pressure vessel of these blasting equipment has a special valve
which ensures working with blasting pressure in the range of 4 bar
to 7 bar with the same machine. The technique of vacuum blasting is
ideal for situations where "low pressure blasting" is compulsory.
Every vacuum blasting machine has a vacuum & blast hose assembly,
specially constructed lightweight blast head, and a pair of brushes
for treating flat surfaces. The said brushes are made using very
special fibers, which assures it's top performance and cost saving.
How does it work?
The TS Machinery machine mixes abrasive particles with compressed
air to allow them to be blown on to the work surface at high speed
which strips back the paint and other contaminants to original
surface and all residues are contained and vacuumed back into the
system. The system can also operate at low pressure ranging from
58-100 psi.
The heavy particles are separated from the dust; the particles are
then allowed to fall into a collection drum. The mullet-cartridge
dust collector captures the fine dust allowing it to fall into the
collection drum and the air then passes through a filter to ensure
that the discharge air is clean. With no moving parts, this air
powered venturi system is the ultimate in reliability.
Features
Flawlessness
Trouble free functionality
Required less maintenance
Highly efficient and longer running time
Technicial Speciafication
| Model | TS-300L |
| Size | 2100x1100x2300(L*W*H) |
| Weight | About 600kg |
| Voltage | 380V 50HZ |
| The dia of nozzle | 9mm |
| Working pressure | 4-7bar |
| Working radius | 60m |
| Working efficiency | 8-10m²/h |
| Working type | Automatic recycle type |
| Air consumption | 3-6m³/min(recommend to match with 37kw air compressor) |
| Fan power | 11kw |
| Filtration area | About 20m² |
| Cleaning level | Sa2.5-3 |
| Roughness | 40-70μm |
| Usable abrasive | G25-150 steel grits |
Powerful Benefits
1. 100% dust free operation because of fully automated blasting &
vacuum start/stop sequence
2. Clean, abrasive free object surface after blasting
3. No time-loss through automatic filter cleaning and dust
discharge
4. Easy disposal of collected dust in dust hole
5. Unit can be relocated and/or transported easily
6. Wide range of brushes to fit all (flat, cornered, radiused)
surfaces
Better Blasting Value
1. Long(er) uninterrupted blasting sessions because of 150 or 300
liter blast pots
2. Suited for steel grit
3. Spare parts can be simply removed for quick maintenance
4. Units are easily demounted in smaller parts for use in contained
spaces (ships, tanks, etc.)
5. Hose lengths up to 60 meters
Environmentally Friendly
No dust and contamination which are collected in plastic bags for
safe disposal
Closed circuit blasting saves on abrasive costs
Vacuum Blasting In Process
Maintenance
A. Check the recycle system, electrical system and spare parts, if
they are broken, repair or change them.
B. Check every pressure gauge regularly.
C. Check if the hose, tube and cable protective layer is broken,
change them if anything is broken.
D. Check the usage of fan, add lubricant in the fan regularly.
E. If the machine is under the status of rest, please put the
machine in the area of dry and ventilated places, avoid direct
sunlight.
