Tumble Belt Shot Blast Machine Q326 For Processing Mass-produced
Parts
Application
Tumble belt shot blast machine is suitable for:
casting parts
forging parts
casting tube and elbows
other small fabricated metal work pieces
Description
Tumble blasting machine with rubber belt is ideal for processing
mass-produced parts, which can be tumbled and exposure of all
surfaces to the blasting stream, with high cleaning efficiency.
Specification
Model Spec. | Q326 |
| Productivity(T/h) | 0.6-1.2 |
| Maximum Load (kg) | 200 |
| Maximum Product (kg) | 10 |
| Disc Dia.(mm) | 600 |
| Capacity(m³) | 0.15 |
| Shot Flow(kg/min) | 100 |
| Separate Type | Sieve + Air Wash |
| Air Volume(m³/h) | 2200 |
| Power(kw) | 10.85 |
Parts Introduction
This is a small cleaning equipment, mainly composed by the cabinet,
blasting system, abrasive recycle system, dust collector,
electrical system and etc.
a. Blasting Cabinet(Longer Serive Time)
Inside the cabinet, there equips with wearing-resistant rubber to
carry the products rotate. The shell is protected by special
wear-resistant alloy shield mounted on end sides of belt, which is
made by high chromium iron casting.
b. TS Blast Wheel (High Efficiency + Longer Service time)
It is key part of shot blasting machine, consists of blades,
control cage, wheel disc, impeller, protective linings, wheel
house, feeding pipe, special motor and etc.
c. Door (Good Sealing)
It is single swing door hanging with wear-resistant rubber to
protect the door and sealing.
d. Elevator + Air Wash Separator
(with advanced design, dust and abrasive can be separated up to
99.5%)
To ensure conveyor belt not slip when machine is working, the
pulley was made into a squirrel cage, that increase friction
between belt and pulley, reduce the press-tightening force, extend
belt service life. While elevator is equipped with a tension
device, belt can be tensed by adjusting the upper bolt when it
loose.
e. Cartridge Dust Collector(More Easier to Clean)
Pulse-jet Air Clean System
The dust collector has a push button to “pulse” the cartridges with
a jet of compressed air between blast cycle to purge the filter.
Upgrade option, the part can be programmed in PLC.
f. Electrical Control Panel (More Safty)
Qualified electronic components from famous company, such as
Schneider, Chint or other Equivalent brand;
With Emergency Button; Control Voltage 24V;
Interlock System: there is a limit switch above the door, only
after the door closed, can the blasting wheel be started.
Before and After
Why choose tumble belt shot blasting machine from TS Blasting?
Tumble belt shot blast machine is blast cleaning equipment for
casting parts, forging parts and small fabricated metal work
pieces. Tumble belt rotates with work pieces on it at the bottom of
blasting chamber. Blasting wheels on top blast steel shots and
grits on work pieces. Left and right chamber are protected by alloy
liners.
Package
